CTPP March 2013

ctpp@listserv.transportation.org

23 participants
38 discussions

[CTPP] Bills in congress proposing to make ACS voluntary.

by Weinberger

Hi all, It is worth noting that efforts to make the ACS voluntary are again proposed in the House and Senate. Each bill seeks to make participation voluntary except for name, contact information, date and number of people living in household, each proposes to eliminate the fines, and oddly, each proposes that no one be compelled to reveal religion, but that is already in Title 13. The current status of each bill is as follows: The Senate bill was introduced and referred to the Committee on Homeland Security and Governmental Affairs, the House bill was Referred to the House Committee on Oversight and Government Reform. Currently H.R 1078 and the identically worded S. 530 (text below) call for: H. R. 1078 To make participation in the American Community Survey voluntary, except with respect to certain basic questions, and for other purposes. IN THE HOUSE OF REPRESENTATIVES March 12, 2013 Mr. POE of Texas (for himself, Mr. LAMBORN, Mr. DUNCAN of South Carolina, Mr. JONES, Mr. HUELSKAMP, Mr. CHAFFETZ, Mr. SAM JOHNSON of Texas, Mr. SCALISE, Mr. WALBERG, Mr. AUSTIN SCOTT of Georgia, Mr. GOWDY, Mr. FORTENBERRY, Mr. CULBERSON, Mr. HALL, Mrs. ELLMERS, Mr. LATTA, and Mr. LUETKEMEYER) introduced the following bill; which was referred to the Committee on Oversight and Government Reform ________________________________ A BILL To make participation in the American Community Survey voluntary, except with respect to certain basic questions, and for other purposes. Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled, SECTION 1. PARTICIPATION IN AMERICAN COMMUNITY SURVEY. (a) Optional Questions- Section 193 of title 13, United States Code, is amended by adding at the end the following: `The Secretary shall include, in the instructions for completing any survey authorized under this section, a statement indicating that answering any question other than questions that solicit the information described in section 221(c)(2)(A) is optional.'. (b) Refusal To Participate- Section 221 of title 13, United States Code, is amended-- (1) in subsection (a), by striking `Whoever, being over eighteen years of age,' and inserting `Except as provided in subsection (c), any person older than 18 years of age who'; and (2) by amending subsection (c) to read as follows: `(c)(1) Notwithstanding any other provision under this title-- `(A) no person may be compelled to disclose information relative to the person's religious beliefs or to membership in a religious body; and `(B) except as provided in paragraph (2), no person may be fined or otherwise compelled to answer questions in connection with the survey, conducted by the Secretary of Commerce, which is commonly referred to as the `American Community Survey'. `(2) Paragraph (1)(B)-- `(A) shall not apply to any question that elicits-- `(i) the name of the respondent; `(ii) contact information for the respondent; `(iii) the date of the response; or `(iv) the number of people living or staying at the same address; and `(B) does not waive any penalty imposed for conduct described in subsection (b).'. 113th CONGRESS 1st Session S. 530 To make participation in the American Community Survey voluntary, except with respect to certain basic questions, and for other purposes. IN THE SENATE OF THE UNITED STATES March 12, 2013 Mr. PAUL (for himself, Mr. MCCONNELL, Mr. VITTER, and Mr. JOHANNS) introduced the following bill; which was read twice and referred to the Committee on Homeland Security and Governmental Affairs ________________________________ A BILL To make participation in the American Community Survey voluntary, except with respect to certain basic questions, and for other purposes. Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled, SECTION 1. PARTICIPATION IN AMERICAN COMMUNITY SURVEY. (a) Optional Questions- Section 193 of title 13, United States Code, is amended by adding at the end the following: `The Secretary shall include, in the instructions for completing any survey authorized under this section, a statement indicating that answering any question other than questions that solicit the information described in section 221(c)(2)(A) is optional.'. (b) Refusal To Participate- Section 221 of title 13, United States Code, is amended-- (1) in subsection (a), by striking `Whoever, being over eighteen years of age,' and inserting `Except as provided in subsection (c), any person older than 18 years of age who'; and (2) by amending subsection (c) to read as follows: `(c)(1) Notwithstanding any other provision under this title-- `(A) no person may be compelled to disclose information relative to the person's religious beliefs or to membership in a religious body; and `(B) except as provided in paragraph (2), no person may be fined or otherwise compelled to answer questions in connection with the survey, conducted by the Secretary of Commerce, which is commonly referred to as the `American Community Survey'. `(2) Paragraph (1)(B)-- `(A) shall not apply to any question that elicits-- `(i) the name of the respondent; `(ii) contact information for the respondent; `(iii) the date of the response; or `(iv) the number of people living or staying at the same address; and `(B) does not waive any penalty imposed for conduct described in subsection (b).'. Penelope Z. Weinberger CTPP Program Manager AASHTO 202-624-3556 ctpp.transportation.org

12 years, 4 months

Re: [CTPP] Working with County flow data

by Patricia Becker

When you talk about the number of variables, do you mean combinations or sequential tables? A combination is, e.g., means of travel to work by sex, by race/Hispanic origin. That's 3 variables. Sequential is. e.g., looking first at means of travel, then secondly at travel time, then sex of workers, then race/Hispanic origin of workers. That's four variables but they are not being cross-tabbed with one another. I agree that three is a reasonable limit in a *combination*. The data get stretched so thin that even 3 may be too many. In sequential, you should be able to look at as many variables as needed. Overall, it's still all about the number of cases. The more cases, the lower the MOE and vice versa. Patty Becker On Thu, Mar 14, 2013 at 3:13 PM, Steven Farber <Steven.Farber(a)geog.utah.edu>wrote: > Ed, Slide 39 (and a few preceding) lay the issue out on the table. It does > indeed have to do with covariance. The true equation for the SE of a sum of > random errors must include their covariances in the sum. I suppose when > the number of variables being added together is small, the omission of > covariances does not lead to a large difference in MOEs. But the estimation > of MOEs gets worse and worse, the more covariances that you leave out. > Since covariances are pairwise, the number being left out grows > exponentially with respect to the number of variables being added together. > > Nancy's email below: > > We were told to limit our aggregations to four items by Mark Asiala from > the ACS staff at our Annual California State Data Center meeting. It is > mentioned in his presentation slides online at > http://www.dof.ca.gov/research/demographic/state_census_data_center/meeting… Slide 39 > > There is other information in this presentation about the new sample frame > in the 2011 survey which may be interesting. > > Nancy Gemignani > California State Census Data Center > Demographic Research Unit > (916) 327-0103 ext 2550 > > Steven Farber, Ph.D > Assistant Professor > Department of Geography > University or Utah > http://stevenfarber.wordpress.com > > -----Original Message----- > From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces(a)chrispy.net] > On Behalf Of Ed Christopher > Sent: March-14-13 12:57 PM > To: ctpp-news(a)chrispy.net > Subject: Re: [CTPP] Working with County flow data > > Warning! This may ramble so if you do not care about the issue delete. > > Steve I am looking for specific references to the "limit of 3". I know I > have heard this many times and in fact tested it myself. Using data from > the Missouri State Data Center I got Tract data for the modes people use to > go work for my neighborhood Tract. With the Missouri data they had > published the total commuters calculated with a MOE along with the total > workers. I then went and pulled the 4 block groups for my neighborhood from > the census website. At the time the Missouri Data Center did not have Block > Group data published. I do not know if they have them now, I did not > check. While I could get the breakdown of the modes for the BGs, the table > did not have the total commuters as a subtotal with a corresponding MOE. I > figured I could just calculate my own adding up the 5 modes and do the > calculation. Before I went off to do this the scientist in me took over > and I tested the formula on the tract data just to see if I could replicate > the published MOE for the total n! > umber of commuters. I could not do it. Fortunately, Liang Long came to > my rescue and suggested that I just take the Total number of workers and > subtract those who work at home (both of which have MOEs) and try that. It > worked! I could replicate the published MOE. What this did was prove that > as you more variables to the mix the formula for calculating the MOE breaks > down. > > For what I was doing I was able to find a way of only working with two > variables but many times you can not. > > When I presented this at a transportation census conference in October of > 2011 several users in the "power users session" confirmed that they had > heard that 3 was the most variables you wanted to use at a time. I did > find this on the census site that says "limit the number of variables" > > http://www.census.gov/acs/www/Downloads/data_documentation/Statistical_Test… > > > A few days ago I talked with Elaine Murakami about this and she had the > perfect rule of thumb for me. Since the whole MOE thing is just an > approximation anyway "just take the largest MOE in the string of numbers > you are aggregating and use that". If you think about it, this does make > some mathematical and more importantly intuitive sense. I wish we could > get some statisticians to help out here. We need easy, quick to use methods. > > > Steven Farber wrote: > > I think I jumped the gun before when stating concerns over exploding > MOE's. > > > > Going back to the New York State Data Center document, you'll notice > that the MOE has increased in absolute terms when summing over areas, but > dropped in relative terms in comparison to the sum. > > > > So MOE has increased but the Coefficient of Variation has dropped. In > other words, our aggregated estimate is more precise than each of the > smaller area estimates. > > > > http://www.census.gov/acs/www/Downloads/handbooks/ACSResearch.pdf - > Appendix 3 contains all the calculations required. > > > > Ed, do you recall where you saw that this type of calculation should be > limited to 3 summands at a time? > > > > > > > > > > Steven Farber, Ph.D > > Assistant Professor > > Department of Geography > > University or Utah > > http://stevenfarber.wordpress.com > > > > -----Original Message----- > > From: ctpp-news-bounces(a)chrispy.net > > [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of liang.long(a)dot.gov > > Sent: March-12-13 10:18 AM > > To: ctpp-news(a)chrispy.net > > Subject: Re: [CTPP] Working with County flow data > > > > I can see why Census doesn't recommend do more than three variables at a > time. When you add 17 counties together, you get a much bigger area with > more households sampled. In theory, you should get a smaller MOEs compared > each individual county. But if you derive MOEs from those 17 counties, you > will get a much bigger MOEs, which is contradictory to the theory. > > > > > > ________________________________________ > > From: ctpp-news-bounces(a)chrispy.net [ctpp-news-bounces(a)chrispy.net] on > > behalf of Ed Christopher [edc(a)berwyned.com] > > Sent: Tuesday, March 12, 2013 11:15 AM > > To: ctpp-news(a)chrispy.net > > Subject: Re: [CTPP] Working with County flow data > > > > Thanks--I know the spread sheet allows you to recalculate MOEs for more > than three variables but I remember doing more than 3 a while back and I > was getting some wild MOEs. When I dug into it I found something in the > Census compass reports that said not to do more than three variables at a > time. I was hoping that someone figured out a way around this. > > > > Ed C > > > > On Mar 12, 2013, at 9:59 AM, "Hoctor Mulmat, Darlanne" < > Darlanne.Mulmat(a)sandag.org<mailto:Darlanne.Mulmat(a)sandag.org>> wrote: > > > > The New York State Data Center developed a Statistical Calculations Menu > that includes an option for computing the margin of error for the sum of > three or more estimates. See attached. > > > > Darlanne Hoctor Mulmat > > Applied Research Division - Criminal Justice/Public Policy San Diego > > Association of Governments > > 619-699-7326 > > > > From: > > ctpp-news-bounces(a)chrispy.net<mailto:ctpp-news-bounces(a)chrispy.net> > > [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of > > Ed.Christopher(a)dot.gov<mailto:Ed.Christopher(a)dot.gov> > > Sent: Tuesday, March 12, 2013 6:57 AM > > To: ctpp-news(a)chrispy.net<mailto:ctpp-news(a)chrispy.net> > > Subject: [CTPP] Working with County flow data > > > > Has anyone come up with some easy ways for collapsing and grouping > counties together using last week's county flow data and recalculating new > MOEs. I have so many counties that I want to group together that I am > looking for a quick way that can handle "lots" of counties. Another issue > I am struggling with is that we are always told not to group more than > three variables at a time or the formulas for calculating the new MOE do > not really work. This is particularly troublesome especially if I am > trying to group 17 counties together. What it comes down to is 9 different > calculations given that I can only group 3 counties at a time together. > Anyone figure out any short cuts or ways around this short of disregarding > the MOEs altogether? Given all the clustering that I am looking at using > the "cheat" sheets I am used to, I will be recalculating MOEs for weeks. > > > > > > Ed Christopher > > <StatisticalCalculationsMenu.xls> > > _______________________________________________ > > ctpp-news mailing list > > ctpp-news(a)ryoko.chrispy.net<mailto:ctpp-news(a)ryoko.chrispy.net> > > http://ryoko.chrispy.net/mailman/listinfo/ctpp-news > > > > _______________________________________________ > > ctpp-news mailing list > > ctpp-news(a)ryoko.chrispy.net > > http://ryoko.chrispy.net/mailman/listinfo/ctpp-news > > > > _______________________________________________ > > ctpp-news mailing list > > ctpp-news(a)ryoko.chrispy.net > > http://ryoko.chrispy.net/mailman/listinfo/ctpp-news > > > > -- > Ed Christopher > 708-283-3534 (V) > 708-574-8131 (cell) > > FHWA RC-TST-PLN > 4749 Lincoln Mall Drive, Suite 600 > Matteson, IL 60443 > _______________________________________________ > ctpp-news mailing list > ctpp-news(a)ryoko.chrispy.net > http://ryoko.chrispy.net/mailman/listinfo/ctpp-news > > _______________________________________________ > ctpp-news mailing list > ctpp-news(a)ryoko.chrispy.net > http://ryoko.chrispy.net/mailman/listinfo/ctpp-news > -- Patricia C. (Patty) Becker APB Associates/Southeast Michigan Census Council (SEMCC) 28300 Franklin Rd, Southfield, MI 48034 office: 248-354-6520 home:248-355-2428 pbecker(a)umich.edu

12 years, 4 months

Re: [CTPP] Working with County flow data

by Chu

Some covariance terms are positive and some are negative in most cases. How the number of variables affect the estimated MOE for the sum depends on how these positive and negative covariance terms add up. -----Original Message----- From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of Steven Farber Sent: Thursday, March 14, 2013 3:13 PM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] Working with County flow data Ed, Slide 39 (and a few preceding) lay the issue out on the table. It does indeed have to do with covariance. The true equation for the SE of a sum of random errors must include their covariances in the sum. I suppose when the number of variables being added together is small, the omission of covariances does not lead to a large difference in MOEs. But the estimation of MOEs gets worse and worse, the more covariances that you leave out. Since covariances are pairwise, the number being left out grows exponentially with respect to the number of variables being added together. Nancy's email below: We were told to limit our aggregations to four items by Mark Asiala from the ACS staff at our Annual California State Data Center meeting. It is mentioned in his presentation slides online at http://www.dof.ca.gov/research/demographic/state_census_data_center/meeting… Slide 39 There is other information in this presentation about the new sample frame in the 2011 survey which may be interesting. Nancy Gemignani California State Census Data Center Demographic Research Unit (916) 327-0103 ext 2550 Steven Farber, Ph.D Assistant Professor Department of Geography University or Utah http://stevenfarber.wordpress.com -----Original Message----- From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of Ed Christopher Sent: March-14-13 12:57 PM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] Working with County flow data Warning! This may ramble so if you do not care about the issue delete. Steve I am looking for specific references to the "limit of 3". I know I have heard this many times and in fact tested it myself. Using data from the Missouri State Data Center I got Tract data for the modes people use to go work for my neighborhood Tract. With the Missouri data they had published the total commuters calculated with a MOE along with the total workers. I then went and pulled the 4 block groups for my neighborhood from the census website. At the time the Missouri Data Center did not have Block Group data published. I do not know if they have them now, I did not check. While I could get the breakdown of the modes for the BGs, the table did not have the total commuters as a subtotal with a corresponding MOE. I figured I could just calculate my own adding up the 5 modes and do the calculation. Before I went off to do this the scientist in me took over and I tested the formula on the tract data just to see if I could replicate the published MOE for the total n! umber of commuters. I could not do it. Fortunately, Liang Long came to my rescue and suggested that I just take the Total number of workers and subtract those who work at home (both of which have MOEs) and try that. It worked! I could replicate the published MOE. What this did was prove that as you more variables to the mix the formula for calculating the MOE breaks down. For what I was doing I was able to find a way of only working with two variables but many times you can not. When I presented this at a transportation census conference in October of 2011 several users in the "power users session" confirmed that they had heard that 3 was the most variables you wanted to use at a time. I did find this on the census site that says "limit the number of variables" http://www.census.gov/acs/www/Downloads/data_documentation/Statistical_Test… A few days ago I talked with Elaine Murakami about this and she had the perfect rule of thumb for me. Since the whole MOE thing is just an approximation anyway "just take the largest MOE in the string of numbers you are aggregating and use that". If you think about it, this does make some mathematical and more importantly intuitive sense. I wish we could get some statisticians to help out here. We need easy, quick to use methods. Steven Farber wrote: > I think I jumped the gun before when stating concerns over exploding MOE's. > > Going back to the New York State Data Center document, you'll notice that the MOE has increased in absolute terms when summing over areas, but dropped in relative terms in comparison to the sum. > > So MOE has increased but the Coefficient of Variation has dropped. In other words, our aggregated estimate is more precise than each of the smaller area estimates. > > http://www.census.gov/acs/www/Downloads/handbooks/ACSResearch.pdf - Appendix 3 contains all the calculations required. > > Ed, do you recall where you saw that this type of calculation should be limited to 3 summands at a time? > > > > > Steven Farber, Ph.D > Assistant Professor > Department of Geography > University or Utah > http://stevenfarber.wordpress.com > > -----Original Message----- > From: ctpp-news-bounces(a)chrispy.net > [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of liang.long(a)dot.gov > Sent: March-12-13 10:18 AM > To: ctpp-news(a)chrispy.net > Subject: Re: [CTPP] Working with County flow data > > I can see why Census doesn't recommend do more than three variables at a time. When you add 17 counties together, you get a much bigger area with more households sampled. In theory, you should get a smaller MOEs compared each individual county. But if you derive MOEs from those 17 counties, you will get a much bigger MOEs, which is contradictory to the theory. > > > ________________________________________ > From: ctpp-news-bounces(a)chrispy.net [ctpp-news-bounces(a)chrispy.net] on > behalf of Ed Christopher [edc(a)berwyned.com] > Sent: Tuesday, March 12, 2013 11:15 AM > To: ctpp-news(a)chrispy.net > Subject: Re: [CTPP] Working with County flow data > > Thanks--I know the spread sheet allows you to recalculate MOEs for more than three variables but I remember doing more than 3 a while back and I was getting some wild MOEs. When I dug into it I found something in the Census compass reports that said not to do more than three variables at a time. I was hoping that someone figured out a way around this. > > Ed C > > On Mar 12, 2013, at 9:59 AM, "Hoctor Mulmat, Darlanne" <Darlanne.Mulmat(a)sandag.org<mailto:Darlanne.Mulmat(a)sandag.org>> wrote: > > The New York State Data Center developed a Statistical Calculations Menu that includes an option for computing the margin of error for the sum of three or more estimates. See attached. > > Darlanne Hoctor Mulmat > Applied Research Division - Criminal Justice/Public Policy San Diego > Association of Governments > 619-699-7326 > > From: > ctpp-news-bounces(a)chrispy.net<mailto:ctpp-news-bounces(a)chrispy.net> > [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of > Ed.Christopher(a)dot.gov<mailto:Ed.Christopher(a)dot.gov> > Sent: Tuesday, March 12, 2013 6:57 AM > To: ctpp-news(a)chrispy.net<mailto:ctpp-news(a)chrispy.net> > Subject: [CTPP] Working with County flow data > > Has anyone come up with some easy ways for collapsing and grouping counties together using last week's county flow data and recalculating new MOEs. I have so many counties that I want to group together that I am looking for a quick way that can handle "lots" of counties. Another issue I am struggling with is that we are always told not to group more than three variables at a time or the formulas for calculating the new MOE do not really work. This is particularly troublesome especially if I am trying to group 17 counties together. What it comes down to is 9 different calculations given that I can only group 3 counties at a time together. Anyone figure out any short cuts or ways around this short of disregarding the MOEs altogether? Given all the clustering that I am looking at using the "cheat" sheets I am used to, I will be recalculating MOEs for weeks. > > > Ed Christopher > <StatisticalCalculationsMenu.xls> > _______________________________________________ > ctpp-news mailing list > ctpp-news(a)ryoko.chrispy.net<mailto:ctpp-news(a)ryoko.chrispy.net> > http://ryoko.chrispy.net/mailman/listinfo/ctpp-news > > _______________________________________________ > ctpp-news mailing list > ctpp-news(a)ryoko.chrispy.net > http://ryoko.chrispy.net/mailman/listinfo/ctpp-news > > _______________________________________________ > ctpp-news mailing list > ctpp-news(a)ryoko.chrispy.net > http://ryoko.chrispy.net/mailman/listinfo/ctpp-news > -- Ed Christopher 708-283-3534 (V) 708-574-8131 (cell) FHWA RC-TST-PLN 4749 Lincoln Mall Drive, Suite 600 Matteson, IL 60443 _______________________________________________ ctpp-news mailing list ctpp-news(a)ryoko.chrispy.net http://ryoko.chrispy.net/mailman/listinfo/ctpp-news _______________________________________________ ctpp-news mailing list ctpp-news(a)ryoko.chrispy.net http://ryoko.chrispy.net/mailman/listinfo/ctpp-news

12 years, 4 months

Re: [CTPP] Working with County flow data

by Ed Christopher

Warning! This may ramble so if you do not care about the issue delete. Steve I am looking for specific references to the "limit of 3". I know I have heard this many times and in fact tested it myself. Using data from the Missouri State Data Center I got Tract data for the modes people use to go work for my neighborhood Tract. With the Missouri data they had published the total commuters calculated with a MOE along with the total workers. I then went and pulled the 4 block groups for my neighborhood from the census website. At the time the Missouri Data Center did not have Block Group data published. I do not know if they have them now, I did not check. While I could get the breakdown of the modes for the BGs, the table did not have the total commuters as a subtotal with a corresponding MOE. I figured I could just calculate my own adding up the 5 modes and do the calculation. Before I went off to do this the scientist in me took over and I tested the formula on the tract data just to see if I could replicate the published MOE for the total number of commuters. I could not do it. Fortunately, Liang Long came to my rescue and suggested that I just take the Total number of workers and subtract those who work at home (both of which have MOEs) and try that. It worked! I could replicate the published MOE. What this did was prove that as you more variables to the mix the formula for calculating the MOE breaks down. For what I was doing I was able to find a way of only working with two variables but many times you can not. When I presented this at a transportation census conference in October of 2011 several users in the "power users session" confirmed that they had heard that 3 was the most variables you wanted to use at a time. I did find this on the census site that says "limit the number of variables" http://www.census.gov/acs/www/Downloads/data_documentation/Statistical_Test… A few days ago I talked with Elaine Murakami about this and she had the perfect rule of thumb for me. Since the whole MOE thing is just an approximation anyway "just take the largest MOE in the string of numbers you are aggregating and use that". If you think about it, this does make some mathematical and more importantly intuitive sense. I wish we could get some statisticians to help out here. We need easy, quick to use methods. Steven Farber wrote: > I think I jumped the gun before when stating concerns over exploding MOE's. > > Going back to the New York State Data Center document, you'll notice that the MOE has increased in absolute terms when summing over areas, but dropped in relative terms in comparison to the sum. > > So MOE has increased but the Coefficient of Variation has dropped. In other words, our aggregated estimate is more precise than each of the smaller area estimates. > > http://www.census.gov/acs/www/Downloads/handbooks/ACSResearch.pdf - Appendix 3 contains all the calculations required. > > Ed, do you recall where you saw that this type of calculation should be limited to 3 summands at a time? > > > > > Steven Farber, Ph.D > Assistant Professor > Department of Geography > University or Utah > http://stevenfarber.wordpress.com > > -----Original Message----- > From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of liang.long(a)dot.gov > Sent: March-12-13 10:18 AM > To: ctpp-news(a)chrispy.net > Subject: Re: [CTPP] Working with County flow data > > I can see why Census doesn't recommend do more than three variables at a time. When you add 17 counties together, you get a much bigger area with more households sampled. In theory, you should get a smaller MOEs compared each individual county. But if you derive MOEs from those 17 counties, you will get a much bigger MOEs, which is contradictory to the theory. > > > ________________________________________ > From: ctpp-news-bounces(a)chrispy.net [ctpp-news-bounces(a)chrispy.net] on behalf of Ed Christopher [edc(a)berwyned.com] > Sent: Tuesday, March 12, 2013 11:15 AM > To: ctpp-news(a)chrispy.net > Subject: Re: [CTPP] Working with County flow data > > Thanks--I know the spread sheet allows you to recalculate MOEs for more than three variables but I remember doing more than 3 a while back and I was getting some wild MOEs. When I dug into it I found something in the Census compass reports that said not to do more than three variables at a time. I was hoping that someone figured out a way around this. > > Ed C > > On Mar 12, 2013, at 9:59 AM, "Hoctor Mulmat, Darlanne" <Darlanne.Mulmat(a)sandag.org<mailto:Darlanne.Mulmat(a)sandag.org>> wrote: > > The New York State Data Center developed a Statistical Calculations Menu that includes an option for computing the margin of error for the sum of three or more estimates. See attached. > > Darlanne Hoctor Mulmat > Applied Research Division - Criminal Justice/Public Policy San Diego Association of Governments > 619-699-7326 > > From: ctpp-news-bounces(a)chrispy.net<mailto:ctpp-news-bounces(a)chrispy.net> [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of Ed.Christopher(a)dot.gov<mailto:Ed.Christopher(a)dot.gov> > Sent: Tuesday, March 12, 2013 6:57 AM > To: ctpp-news(a)chrispy.net<mailto:ctpp-news(a)chrispy.net> > Subject: [CTPP] Working with County flow data > > Has anyone come up with some easy ways for collapsing and grouping counties together using last week's county flow data and recalculating new MOEs. I have so many counties that I want to group together that I am looking for a quick way that can handle "lots" of counties. Another issue I am struggling with is that we are always told not to group more than three variables at a time or the formulas for calculating the new MOE do not really work. This is particularly troublesome especially if I am trying to group 17 counties together. What it comes down to is 9 different calculations given that I can only group 3 counties at a time together. Anyone figure out any short cuts or ways around this short of disregarding the MOEs altogether? Given all the clustering that I am looking at using the "cheat" sheets I am used to, I will be recalculating MOEs for weeks. > > > Ed Christopher > <StatisticalCalculationsMenu.xls> > _______________________________________________ > ctpp-news mailing list > ctpp-news(a)ryoko.chrispy.net<mailto:ctpp-news(a)ryoko.chrispy.net> > http://ryoko.chrispy.net/mailman/listinfo/ctpp-news > > _______________________________________________ > ctpp-news mailing list > ctpp-news(a)ryoko.chrispy.net > http://ryoko.chrispy.net/mailman/listinfo/ctpp-news > > _______________________________________________ > ctpp-news mailing list > ctpp-news(a)ryoko.chrispy.net > http://ryoko.chrispy.net/mailman/listinfo/ctpp-news > -- Ed Christopher 708-283-3534 (V) 708-574-8131 (cell) FHWA RC-TST-PLN 4749 Lincoln Mall Drive, Suite 600 Matteson, IL 60443

12 years, 4 months

Re: [CTPP] Working with County flow data

by Gemignani

We were told to limit our aggregations to four items by Mark Asiala from the ACS staff at our Annual California State Data Center meeting. It is mentioned in his presentation slides online at http://www.dof.ca.gov/research/demographic/state_census_data_center/meeting… Slide 39 There is other information in this presentation about the new sample frame in the 2011 survey which may be interesting. Nancy Gemignani California State Census Data Center Demographic Research Unit (916) 327-0103 ext 2550 -----Original Message----- From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of Steven Farber Sent: Thursday, March 14, 2013 10:17 AM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] Working with County flow data I think I jumped the gun before when stating concerns over exploding MOE's. Going back to the New York State Data Center document, you'll notice that the MOE has increased in absolute terms when summing over areas, but dropped in relative terms in comparison to the sum. So MOE has increased but the Coefficient of Variation has dropped. In other words, our aggregated estimate is more precise than each of the smaller area estimates. http://www.census.gov/acs/www/Downloads/handbooks/ACSResearch.pdf - Appendix 3 contains all the calculations required. Ed, do you recall where you saw that this type of calculation should be limited to 3 summands at a time? Steven Farber, Ph.D Assistant Professor Department of Geography University or Utah http://stevenfarber.wordpress.com -----Original Message----- From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of liang.long(a)dot.gov Sent: March-12-13 10:18 AM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] Working with County flow data I can see why Census doesn't recommend do more than three variables at a time. When you add 17 counties together, you get a much bigger area with more households sampled. In theory, you should get a smaller MOEs compared each individual county. But if you derive MOEs from those 17 counties, you will get a much bigger MOEs, which is contradictory to the theory. ________________________________________ From: ctpp-news-bounces(a)chrispy.net [ctpp-news-bounces(a)chrispy.net] on behalf of Ed Christopher [edc(a)berwyned.com] Sent: Tuesday, March 12, 2013 11:15 AM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] Working with County flow data Thanks--I know the spread sheet allows you to recalculate MOEs for more than three variables but I remember doing more than 3 a while back and I was getting some wild MOEs. When I dug into it I found something in the Census compass reports that said not to do more than three variables at a time. I was hoping that someone figured out a way around this. Ed C On Mar 12, 2013, at 9:59 AM, "Hoctor Mulmat, Darlanne" <Darlanne.Mulmat(a)sandag.org<mailto:Darlanne.Mulmat(a)sandag.org>> wrote: The New York State Data Center developed a Statistical Calculations Menu that includes an option for computing the margin of error for the sum of three or more estimates. See attached. Darlanne Hoctor Mulmat Applied Research Division - Criminal Justice/Public Policy San Diego Association of Governments 619-699-7326 From: ctpp-news-bounces(a)chrispy.net<mailto:ctpp-news-bounces(a)chrispy.net> [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of Ed.Christopher(a)dot.gov<mailto:Ed.Christopher(a)dot.gov> Sent: Tuesday, March 12, 2013 6:57 AM To: ctpp-news(a)chrispy.net<mailto:ctpp-news(a)chrispy.net> Subject: [CTPP] Working with County flow data Has anyone come up with some easy ways for collapsing and grouping counties together using last week's county flow data and recalculating new MOEs. I have so many counties that I want to group together that I am looking for a quick way that can handle "lots" of counties. Another issue I am struggling with is that we are always told not to group more than three variables at a time or the formulas for calculating the new MOE do not really work. This is particularly troublesome especially if I am trying to group 17 counties together. What it comes down to is 9 different calculations given that I can only group 3 counties at a time together. Anyone figure out any short cuts or ways around this short of disregarding the MOEs altogether? Given all the clustering that I am looking at using the "cheat" sheets I am used to, I will be recalculating MOEs for weeks. Ed Christopher <StatisticalCalculationsMenu.xls> _______________________________________________ ctpp-news mailing list ctpp-news(a)ryoko.chrispy.net<mailto:ctpp-news(a)ryoko.chrispy.net> http://ryoko.chrispy.net/mailman/listinfo/ctpp-news _______________________________________________ ctpp-news mailing list ctpp-news(a)ryoko.chrispy.net http://ryoko.chrispy.net/mailman/listinfo/ctpp-news _______________________________________________ ctpp-news mailing list ctpp-news(a)ryoko.chrispy.net http://ryoko.chrispy.net/mailman/listinfo/ctpp-news

12 years, 4 months

Re: [CTPP] Working with County flow data

by Steven Farber

I think I jumped the gun before when stating concerns over exploding MOE's. Going back to the New York State Data Center document, you'll notice that the MOE has increased in absolute terms when summing over areas, but dropped in relative terms in comparison to the sum. So MOE has increased but the Coefficient of Variation has dropped. In other words, our aggregated estimate is more precise than each of the smaller area estimates. http://www.census.gov/acs/www/Downloads/handbooks/ACSResearch.pdf - Appendix 3 contains all the calculations required. Ed, do you recall where you saw that this type of calculation should be limited to 3 summands at a time? Steven Farber, Ph.D Assistant Professor Department of Geography University or Utah http://stevenfarber.wordpress.com -----Original Message----- From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of liang.long(a)dot.gov Sent: March-12-13 10:18 AM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] Working with County flow data I can see why Census doesn't recommend do more than three variables at a time. When you add 17 counties together, you get a much bigger area with more households sampled. In theory, you should get a smaller MOEs compared each individual county. But if you derive MOEs from those 17 counties, you will get a much bigger MOEs, which is contradictory to the theory. ________________________________________ From: ctpp-news-bounces(a)chrispy.net [ctpp-news-bounces(a)chrispy.net] on behalf of Ed Christopher [edc(a)berwyned.com] Sent: Tuesday, March 12, 2013 11:15 AM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] Working with County flow data Thanks--I know the spread sheet allows you to recalculate MOEs for more than three variables but I remember doing more than 3 a while back and I was getting some wild MOEs. When I dug into it I found something in the Census compass reports that said not to do more than three variables at a time. I was hoping that someone figured out a way around this. Ed C On Mar 12, 2013, at 9:59 AM, "Hoctor Mulmat, Darlanne" <Darlanne.Mulmat(a)sandag.org<mailto:Darlanne.Mulmat(a)sandag.org>> wrote: The New York State Data Center developed a Statistical Calculations Menu that includes an option for computing the margin of error for the sum of three or more estimates. See attached. Darlanne Hoctor Mulmat Applied Research Division - Criminal Justice/Public Policy San Diego Association of Governments 619-699-7326 From: ctpp-news-bounces(a)chrispy.net<mailto:ctpp-news-bounces(a)chrispy.net> [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of Ed.Christopher(a)dot.gov<mailto:Ed.Christopher(a)dot.gov> Sent: Tuesday, March 12, 2013 6:57 AM To: ctpp-news(a)chrispy.net<mailto:ctpp-news(a)chrispy.net> Subject: [CTPP] Working with County flow data Has anyone come up with some easy ways for collapsing and grouping counties together using last week's county flow data and recalculating new MOEs. I have so many counties that I want to group together that I am looking for a quick way that can handle "lots" of counties. Another issue I am struggling with is that we are always told not to group more than three variables at a time or the formulas for calculating the new MOE do not really work. This is particularly troublesome especially if I am trying to group 17 counties together. What it comes down to is 9 different calculations given that I can only group 3 counties at a time together. Anyone figure out any short cuts or ways around this short of disregarding the MOEs altogether? Given all the clustering that I am looking at using the "cheat" sheets I am used to, I will be recalculating MOEs for weeks. Ed Christopher <StatisticalCalculationsMenu.xls> _______________________________________________ ctpp-news mailing list ctpp-news(a)ryoko.chrispy.net<mailto:ctpp-news(a)ryoko.chrispy.net> http://ryoko.chrispy.net/mailman/listinfo/ctpp-news _______________________________________________ ctpp-news mailing list ctpp-news(a)ryoko.chrispy.net http://ryoko.chrispy.net/mailman/listinfo/ctpp-news

12 years, 4 months

Re: [CTPP] OMB Released the New Metropolitan and micropolitan areas

by Graham

That sounds right. Federal statistical agencies are to begin using new MSAs as soon as practical - but that will be a while. I was talking last week with a labor market statistician for our Minnesota BLS shop. She told me the first BLS stats with new MSA definitions will be the monthly employment (and unemployment) #s for January 2014. New MSAs will *not* be used by US BLS & State agencies sooner than that. --Todd Graham Todd Graham Principal Forecaster | Metropolitan Council | Regional Policy and Research todd.graham(a)metc.state.mn.us P. 651.602.1322 | F. 651.602.1674 390 North Robert Street | St. Paul, MN 55101 | metrocouncil.org/data -----Original Message----- From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of liang.long(a)dot.gov Sent: Wednesday, March 13, 2013 11:22 AM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] OMB Released the New Metropolitan and micropolitan areas Hi, Nancy As far as I know, the new MSA definitions will not be applied to ACS 2012, which will be released this year. My guess is that they may be actually applied to ACS 2013, which will be out in calendar year 2014. Since MSAs are based on counties, you can always aggregate counties for the new MSA definitions. Thanks, Liang ________________________________________ From: ctpp-news-bounces(a)chrispy.net [ctpp-news-bounces(a)chrispy.net] on behalf of Nancy Reger [Nreger(a)morpc.org] Sent: Wednesday, March 13, 2013 11:16 AM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] OMB Released tje New Metropolitan and micropolitan areas Liang, Do you know when the ACS will start using these new MSA delineations in the data reported? Thank you, Nancy Nancy Reger | nreger(a)morpc.org Deputy Director, Transportation | Mid-Ohio Regional Planning Commission T: 614.233.4154 | | F: 614.233.4254 111 Liberty Street, Suite 100 | Columbus, OH 43215

12 years, 4 months

Re: [CTPP] OMB Released the New Metropolitan and micropolitan areas

by Nancy Reger

Thank you Liang. Unfortunately, many of the counties in the Columbus MSA fall below the 65,000 count, so we will have to use 3 year sample data. Thank you again, Nancy -----Original Message----- From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of liang.long(a)dot.gov Sent: Wednesday, March 13, 2013 12:22 PM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] OMB Released the New Metropolitan and micropolitan areas Hi, Nancy As far as I know, the new MSA definitions will not be applied to ACS 2012, which will be released this year. My guess is that they may be actually applied to ACS 2013, which will be out in calendar year 2014. Since MSAs are based on counties, you can always aggregate counties for the new MSA definitions. Thanks, Liang ________________________________________ From: ctpp-news-bounces(a)chrispy.net [ctpp-news-bounces(a)chrispy.net] on behalf of Nancy Reger [Nreger(a)morpc.org] Sent: Wednesday, March 13, 2013 11:16 AM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] OMB Released tje New Metropolitan and micropolitan areas Liang, Do you know when the ACS will start using these new MSA delineations in the data reported? Thank you, Nancy Nancy Reger | nreger(a)morpc.org Deputy Director, Transportation | Mid-Ohio Regional Planning Commission T: 614.233.4154 | | F: 614.233.4254 111 Liberty Street, Suite 100 | Columbus, OH 43215 [cid:image001.png(a)01CDADDC.13A5DD60]<http://www.morpc.org/> [cid:image002.png(a)01CDADDC.13A5DD60] <http://www.facebook.com/morpc> [cid:image003.jpg(a)01CDADDC.13A5DD60] <http://www.twitter.com/morpc> From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of Liang Long Sent: Monday, March 04, 2013 11:09 AM To: ctpp-news(a)chrispy.net Subject: [CTPP] OMB Released tje New Metropolitan and micropolitan areas Hi, All Our Census Bureau friend, Brian McKenzie told us that OMB released the metro/micro areas late last week. The new definitions' link http://www.whitehouse.gov/omb/bulletins_default . The new 2006-2010 county worker flows will come out tomorrow some time. Enjoy! Liang Long Cambridge Systematics, Inc. 4800 Hampden Lane Suite 800 Bethesda, MD 20814 tel 301 347 0100 fax 301 347 0101 FHWA 202-366-6971 e-mail llong(a)camsys.com<mailto:llong(a)camsys.com> www.camsys.com

12 years, 4 months

Re: [CTPP] OMB Released the New Metropolitan and micropolitan areas

by liang.long＠dot.gov

Hi, Nancy As far as I know, the new MSA definitions will not be applied to ACS 2012, which will be released this year. My guess is that they may be actually applied to ACS 2013, which will be out in calendar year 2014. Since MSAs are based on counties, you can always aggregate counties for the new MSA definitions. Thanks, Liang ________________________________________ From: ctpp-news-bounces(a)chrispy.net [ctpp-news-bounces(a)chrispy.net] on behalf of Nancy Reger [Nreger(a)morpc.org] Sent: Wednesday, March 13, 2013 11:16 AM To: ctpp-news(a)chrispy.net Subject: Re: [CTPP] OMB Released tje New Metropolitan and micropolitan areas Liang, Do you know when the ACS will start using these new MSA delineations in the data reported? Thank you, Nancy Nancy Reger | nreger(a)morpc.org Deputy Director, Transportation | Mid-Ohio Regional Planning Commission T: 614.233.4154 | | F: 614.233.4254 111 Liberty Street, Suite 100 | Columbus, OH 43215 [cid:image001.png(a)01CDADDC.13A5DD60]<http://www.morpc.org/> [cid:image002.png(a)01CDADDC.13A5DD60] <http://www.facebook.com/morpc> [cid:image003.jpg(a)01CDADDC.13A5DD60] <http://www.twitter.com/morpc> From: ctpp-news-bounces(a)chrispy.net [mailto:ctpp-news-bounces(a)chrispy.net] On Behalf Of Liang Long Sent: Monday, March 04, 2013 11:09 AM To: ctpp-news(a)chrispy.net Subject: [CTPP] OMB Released tje New Metropolitan and micropolitan areas Hi, All Our Census Bureau friend, Brian McKenzie told us that OMB released the metro/micro areas late last week. The new definitions' link http://www.whitehouse.gov/omb/bulletins_default . The new 2006-2010 county worker flows will come out tomorrow some time. Enjoy! Liang Long Cambridge Systematics, Inc. 4800 Hampden Lane Suite 800 Bethesda, MD 20814 tel 301 347 0100 fax 301 347 0101 FHWA 202-366-6971 e-mail llong(a)camsys.com<mailto:llong(a)camsys.com> www.camsys.com

12 years, 4 months

[CTPP] Announcing Travel Assistance for the 14th TRB National Transportation Planning Applications Conference

by Vince Bernardin

Dear CTPP community, Through the generous support of SHRP2, we are pleased to announce that travel assistance will be available to public agency staff and qualifying students for the 14th TRB National Transportation Planning Applications Conference. Applications for support are now available on the conference website (www.trbappcon.org<http://www.trbappcon.org>) and must be submitted by April 1. Please accept our apologies for the short notice and for any cross-posting. Also, please note that the deadline for early bird registration ends April 10th and our block of rooms at the hotel is filling up quickly. We encourage everyone interested to register for the conference and make their hotel and travel reservations soon. For any of you who may not be familiar with the conference, the applications conference aims to provide an outlet for new transportation planning techniques and methods emphasizing practical, innovative and timely technical and policy approaches to transportation planning through professional presentations and workshops over the course of 5 days. The conference will be held in Columbus, Ohio, May 5-9, 2013. See the conference website (www.trbappcon.org<http://www.trbappcon.org>) for more details. We hope, especially with the help of the travel assistance, to see many of you in Columbus! Best, Vince Bernardin Conference Chair

12 years, 4 months

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

CTPP March 2013